Three Phase 220/380V 4 Axes Tension Control Servo System Used for
VEC-VCJ tension control servo has built-in multiple tension control modes: including closed loop speed mode,
closed loop torque mode, open loop speed mode, and open loop torque mode. Vikeda provides a full-servo
tension control solution, with VEC-VCJ tension control dedicated servo as the core, adopts different tension
control modes for different machines, and integrates the tension controller into the servo drive.
control system consists of a man-machine interface, a special servo for tension control, and a tension sensor.
It can realize the open loop tension control of rewinding and unwinding, the closed loop tension control of
rewinding and unwinding, and the process tension control. Achieve high precision, high stability,
maintenance-free and energy-saving effects.
1.Stable start, no jitter at low speed;
2.Servo products are maintenance-free and have a service life of
3. Calculate the winding diameter with the special algorithm of the
servo, the system is simple, efficient and accurate;
4. During acceleration, deceleration or emergency stop,The tension
is stable, and the tension accuracy is controlled Within 1%-5% of
the sensor range;
5.The rewinding and unwinding diameter has a wide range, Basically
Servo System Solution
How to slect the Servo Drive+Servo Motor
How to installation the servo Drive and connecting with Servo
● Install the driver on a dry and sturdy platform. Maintain good
heat dissipation during installation and maintain good grounding.
● Please install in the specified direction to avoid malfunction.
● When installing, please ensure that the servo driver is kept at a
distance from the inner surface of the cabinet and other machines,
otherwise it may cause fire or malfunction.
● When installing, do not block the suction and exhaust ports, and
do not allow foreign objects inside the
product to enter, otherwise it may cause malfunction or fire due to
aging of internal components.
● Do not place heavy objects on or under this product as this may
result in injury.
● Please install in the following environment:
1.places without direct sunlight;
2.Locations where the ambient temperature is in the range of 0 ° C
to 55 ° C;
3.Relative humidity in the range of 0% to 95%, and no condensation;
4.Locations free of water droplets, vapors, dust and oily dust;
5.Locations where there is no high heat device;
6.Non-corrosive, flammable gas and liquid sites;
7.It is not easy to splash water, oil and medicine;
8.places that are not exposed to radioactive radiation;
9.Strong and vibration-free places;
10.Locations where there is no electromagnetic noise interference.
Packing and Shipping
|Packing details of Servo Drive|
|Packing details of Motion Controller|
|Products||VA Motion||VA Expansion||VE Motion||VE Expansion(32)||VE Expansion(76)|
|Quantity||1-5 kits||50-100 kits||200-500 kits|
|Delivery time||Within 3 days||5-10 days||15-25 days|
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
|Satandard Spare Parts||Power terminal||Adapt to E1,E2 structure drive|
|Cn3 encoder plug||Encoder plug on the driver side|
|Cn4 control terminal plug||Input/output signal terminals,user wiring|
|Encoder connection line||The standard cable length is 3, 5, 8, 10, 13, 15 meters, according
needs Provide independent connector
|Power line||The standard cable length is 3, 5, 8, 10, 13, 15 meters, according
needs Provide independent connector
|Drive monitoring line||Connect and adjust the software for remote monitoring and firmware
|Purchasing Spare Parts||USB to RS232 Adapter cable||If necessary, self purchase|
|Ethernet communication line||If necessary, self purchase|
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical,
thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the
national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system
part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the
national standard GB12668.3-2012.